# Accidental Discovery of Flight Case for Super 6

**URL:** <https://forum.udo-audio.com/t/accidental-discovery-of-flight-case-for-super-6/2592>\
**Category:** Super 6\
**Created:** [28 May 2024 06:17 UTC](https://forum.udo-audio.com/t/accidental-discovery-of-flight-case-for-super-6/2592 "2024-05-28T06:17:26Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [28 May 2024 06:17 UTC](https://forum.udo-audio.com/t/accidental-discovery-of-flight-case-for-super-6/2592/1 "2024-05-28T06:17:26Z")

</div>

![IMG_1215](https://europe1.discourse-cdn.com/flex017/uploads/udo_audio/original/1X/40fbf428b829c6ddf966b68dada692c9cf270953.jpeg)  
I’ve been looking for a flight case for the Super 6 desktop for months…I’ve had it mounted above my Iridium desktop for some time and today it occurred to me that, duh, these two are the same size. I pulled out [the case for the Iridium from Analogue Cases](https://analogcases.com/products/unison-case-for-the-waldorf-m) and, lo and behold, it fits right in there! (Pretty much…the Super 6 is just ever so slightly wider and thicker). One could shave off just a tiny bit of the foam on the sides to fit perfectly; then, the foam on the lid is just slightly pressing on the controls. The lid foam could probably be swapped out with a thinner sheet and it would be all fine. Regardless, Analogue Cases could, no doubt, make a case for the Super 6 with only a modest modification to the manufacture of the Waldorf case (I will note this to them via email).

---

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [31 May 2024 20:52 UTC](https://forum.udo-audio.com/t/accidental-discovery-of-flight-case-for-super-6/2592/2 "2024-05-31T20:52:44Z")

</div>

I emailed Analogue Cases about the near fit; they responded saying they would look into offering a case for the Super 6.

---

<div class="post-metadata">

**Author:** ![MattMarantz](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@MattMarantz](https://forum.udo-audio.com/u/MattMarantz)\
**Post date:** [1 June 2024 06:01 UTC](https://forum.udo-audio.com/t/accidental-discovery-of-flight-case-for-super-6/2592/3 "2024-06-01T06:01:54Z")

</div>

Thanks for posting! I needed one this is very helpful! Cheers