# After upgrade aftertouch is routed to pitch in some of my patches **URL:** \ **Category:** Super 6\ **Created:** [10 June 2024 08:22 UTC](https://forum.udo-audio.com/t/after-upgrade-aftertouch-is-routed-to-pitch-in-some-of-my-patches/2654 "2024-06-10T08:22:59Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Axel.s6](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/axel.s6/32/800_2.png) [@Axel.s6](https://forum.udo-audio.com/u/Axel.s6)\ **Post date:** [11 June 2024 06:46 UTC](https://forum.udo-audio.com/t/after-upgrade-aftertouch-is-routed-to-pitch-in-some-of-my-patches/2654/2 "2024-06-11T06:46:12Z")
Yes, I‘m having the same issue. It‘s really annoying. > [@S6 Desktop issues after V1update in MPE-mode w/ LinnStrument](https://forum.udo-audio.com/t/s6-desktop-issues-after-v1update-in-mpe-mode-w-linnstrument/2627): > > Hi there! I have updated my Super 6 Desktop‘s Firmware to Version 1.0 today. While I noticed that the Delay Time LED is finally working (+1), I encounter an issue that makes lot of my patches unusable: somehow the Z axis (channel pressure) of my LinnStrument is linked to pitch modulation. I tried to find a corresponding setting in the Mod Matrix and get rid of it, but I can’t find it. The harder I press a key on LinnStrument, the higher the pitch gets. How do I turn this off? My workaround at this point is turning off the Z-Axis on my LinnStrument, when the patch requires a free running LFO2. You cannot have a free running LFO2 AND After Touch (or a Z-Axis on an MPE controller). --- _[View the full topic](https://forum.udo-audio.com/t/after-upgrade-aftertouch-is-routed-to-pitch-in-some-of-my-patches/2654)._