# Cc values list for DMNO

**URL:** <https://forum.udo-audio.com/t/cc-values-list-for-dmno/3866>\
**Category:** DMNO\
**Tags:** dmno\
**Created:** [18 May 2026 23:10 UTC](https://forum.udo-audio.com/t/cc-values-list-for-dmno/3866 "2026-05-18T23:10:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Piotr](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@Piotr](https://forum.udo-audio.com/u/Piotr)\
**Post date:** [18 May 2026 23:10 UTC](https://forum.udo-audio.com/t/cc-values-list-for-dmno/3866/1 "2026-05-18T23:10:05Z")

</div>

Is there a table somewhere with list of CC values for knobs/sliders, so I could drive and automate DMNO with external sequencer (digitakt 2 btw). Nothing in manual.

---

<div class="post-metadata">

**Author:** ![Piotr](https://avatars.discourse-cdn.com/v4/letter/p/839c29/32.png) [@Piotr](https://forum.udo-audio.com/u/Piotr)\
**Post date:** [29 May 2026 13:13 UTC](https://forum.udo-audio.com/t/cc-values-list-for-dmno/3866/2 "2026-05-29T13:13:03Z")

</div>

Answer from support copy/paste

There’s no official MIDI appendix yet. For now, I would recommend using a MIDI monitor app to identify the CC numbers for the parameters you wish to automate. Just make sure to enable the ‘TX Edits’ and ‘RX Edits’ options in the global MIDI settings.