# Complete reformat of S6 Desktop **URL:** \ **Category:** Super 6\ **Created:** [29 July 2025 14:19 UTC](https://forum.udo-audio.com/t/complete-reformat-of-s6-desktop/3510 "2025-07-29T14:19:15Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![RB26FET](https://avatars.discourse-cdn.com/v4/letter/r/d78d45/32.png) [@RB26FET](https://forum.udo-audio.com/u/RB26FET)\ **Post date:** [29 July 2025 14:19 UTC](https://forum.udo-audio.com/t/complete-reformat-of-s6-desktop/3510/1 "2025-07-29T14:19:15Z")
Recently I bought some presets for the S6 (first mistake right there) and in the process of copying them over I deleted folders, created new ones etc and also copied multiple banks at once which I’ve since read is a bit of a no no on Mac. Subsequently my S6 has been acting a bit weird with presets and user waves. Since there’s a few provisos for administering the S6 with a Mac I figured I’d start afresh reloading factory waves etc from a Windows PC I have. My question is - Is there a way of totally reformatting and copying all factory banks/waves and settings over to the Super 6 in one go? Basically starting from scratch again but with the PC instead of Mac. Thanks in advance. ---
**Author:** ![Jonah](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/jonah/32/735_2.png) [@Jonah](https://forum.udo-audio.com/u/Jonah)\ **Post date:** [29 July 2025 18:28 UTC](https://forum.udo-audio.com/t/complete-reformat-of-s6-desktop/3510/2 "2025-07-29T18:28:14Z")
All the factory patches, sequences and waveforms for the Super 6 are here [Super 6 Support](https://www.udo-audio.com/super-6-support) It should be a case of deleting what’s on your Super 6 and copying said files across. ---
**Author:** ![RB26FET](https://avatars.discourse-cdn.com/v4/letter/r/d78d45/32.png) [@RB26FET](https://forum.udo-audio.com/u/RB26FET)\ **Post date:** [5 August 2025 18:28 UTC](https://forum.udo-audio.com/t/complete-reformat-of-s6-desktop/3510/3 "2025-08-05T18:28:56Z")
Cheers, I was actually failing to administer the S6’s patch drive at all with my MS Surface Go. The S6 wouldn’t show up as an external drive. Which I now remember is why I didn’t use it from the start n went with Mac instead. After some Googling I found the Surface Go (the smallest and least powerful Surface) likely wasn’t supplying enough power via it’s USB C port. I connected the S6 via a USB hub that has PD pass through and everything was cushty. Got everything re-copied to the relevant folders and no more weirdness now (: Thanks again.