# LED Indicator to show current saved value? **URL:** \ **Category:** Feature Wish List\ **Created:** [6 March 2022 18:23 UTC](https://forum.udo-audio.com/t/led-indicator-to-show-current-saved-value/1073 "2022-03-06T18:23:18Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![twntyfive2life](https://avatars.discourse-cdn.com/v4/letter/t/d26b3c/32.png) [@twntyfive2life](https://forum.udo-audio.com/u/twntyfive2life)\ **Post date:** [27 March 2022 01:37 UTC](https://forum.udo-audio.com/t/led-indicator-to-show-current-saved-value/1073/2 "2022-03-27T01:37:01Z")
There was a thread on a similar topic a while back with some good ideas- > [@A way to display the value of a parameter after recalling a patch](https://forum.udo-audio.com/t/a-way-to-display-the-value-of-a-parameter-after-recalling-a-patch/255/12): > > I sent this suggestion to UDO in October and they thought it sounded like a good idea and made a note of it, who knows if it will be implemented though… On the DSI/Sequential OB-6 and P6, when you are on a saved patch, and you change a knob, if you rotate it back to the actual parameter setting of that patch, a little red dot shows up on the patch number display to signify you have matched that setting amount of that saved patch. Obviously, the Super 6 has no display, but! Since the “Manual” L… --- _[View the full topic](https://forum.udo-audio.com/t/led-indicator-to-show-current-saved-value/1073)._