# LFO 2 Bug? (Desktop)

**URL:** <https://forum.udo-audio.com/t/lfo-2-bug-desktop/899>\
**Category:** Super 6\
**Created:** [25 December 2021 13:37 UTC](https://forum.udo-audio.com/t/lfo-2-bug-desktop/899 "2021-12-25T13:37:17Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![leighzi88](https://avatars.discourse-cdn.com/v4/letter/l/aca169/32.png) [@leighzi88](https://forum.udo-audio.com/u/leighzi88)\
**Post date:** [25 December 2021 13:37 UTC](https://forum.udo-audio.com/t/lfo-2-bug-desktop/899/1 "2021-12-25T13:37:17Z")

</div>

Working through the printed manual and my new desktop, I just noticed that when you switch presets and the LFO2 mode lights with both MW and AT, you can’t toggle those lights off unless you first go into manual mode toggle them off and then back into the preset (and from there you can toggle them on and off again in the preset). Same applies to the INIT patch. Seems like a bug to me?

---

<div class="post-metadata">

**Author:** ![gazebo](https://avatars.discourse-cdn.com/v4/letter/g/6f9a4e/32.png) [@gazebo](https://forum.udo-audio.com/u/gazebo)\
**Post date:** [27 January 2022 22:19 UTC](https://forum.udo-audio.com/t/lfo-2-bug-desktop/899/2 "2022-01-27T22:19:30Z")

</div>

Same thing here… also, I’m not able to get only the A.T right LED mode, I got no LED or MW or both only.  
I tried to assign my MPE keyboard to pitch bend, like it’s mentionned in the manual, using the I DDS II button for Desktop version, but no success at all… maybe I’m not doing it right?