# LFO1 in HF TRK mode responding to Pitch Bend

**URL:** <https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338>\
**Category:** Feature Wish List\
**Created:** [22 April 2025 14:38 UTC](https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338 "2025-04-22T14:38:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cube48](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/cube48/32/971_2.png) [@cube48](https://forum.udo-audio.com/u/cube48)\
**Post date:** [22 April 2025 14:38 UTC](https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338/1 "2025-04-22T14:38:01Z")

</div>

As the title says, it would be awesome if LFO1 when set to HF TRK (practically turned to oscillator) would respond to pitch bends like DDS1 an DDS2 do. Right now it’s producing rather unmusical results when doing pitch bend slides with Linnstrument. Thanks for reading this!

---

<div class="post-metadata">

**Author:** ![Quatschmacher](https://avatars.discourse-cdn.com/v4/letter/q/85e7bf/32.png) [@Quatschmacher](https://forum.udo-audio.com/u/Quatschmacher)\
**Post date:** [22 April 2025 17:06 UTC](https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338/2 "2025-04-22T17:06:45Z")

</div>

Which synth are you talking about? Super 8 has the ability to route bender to LFO pitch via the mod matrix so that this can be achieved. (Super Gemini can’t do this itself though as bender is replaced with ribbon in the matrix buttons.)

---

<div class="post-metadata">

**Author:** ![cube48](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/cube48/32/971_2.png) [@cube48](https://forum.udo-audio.com/u/cube48)\
**Post date:** [22 April 2025 18:07 UTC](https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338/3 "2025-04-22T18:07:49Z")

</div>

Ooops, sorry, forgot to mention it … Super 6 Desktop. When trying to map the LFO1 rate to bend, the mod routing behaves like it is mapping the parameter (LED row flings) but modulation amount has no effect on LFO1 pitch/rate.

---

<div class="post-metadata">

**Author:** ![RB26FET](https://avatars.discourse-cdn.com/v4/letter/r/d78d45/32.png) [@RB26FET](https://forum.udo-audio.com/u/RB26FET)\
**Post date:** [22 April 2025 22:23 UTC](https://forum.udo-audio.com/t/lfo1-in-hf-trk-mode-responding-to-pitch-bend/3338/4 "2025-04-22T22:23:42Z")

</div>

I can’t believe I only just realised this too! I’m on a Desktop as well.