# MOD ASSIGN LPF - not possible? **URL:** \ **Category:** Super Gemini\ **Created:** [1 June 2025 09:26 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418 "2025-06-01T09:26:00Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![sinestarproject](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@sinestarproject](https://forum.udo-audio.com/u/sinestarproject)\ **Post date:** [1 June 2025 09:26 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/1 "2025-06-01T09:26:00Z")
Hi All, is there a way to target the LPF with expression pedal? or some other additional mod sources? now im thinking about it, is it because that would mess with the other ‘hard wired’ sources, like ENV1 / 1 & LFO 2? best Pete ---
**Author:** ![Quatschmacher](https://avatars.discourse-cdn.com/v4/letter/q/85e7bf/32.png) [@Quatschmacher](https://forum.udo-audio.com/u/Quatschmacher)\ **Post date:** [1 June 2025 17:48 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/2 "2025-06-01T17:48:38Z")
Totally possible via the mod matrix. There’s a dedicated expression source button. ---
**Author:** ![ekeu](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/ekeu/32/1056_2.png) [@ekeu](https://forum.udo-audio.com/u/ekeu)\ **Post date:** [1 June 2025 21:08 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/3 "2025-06-01T21:08:00Z")
As @Quatschmacher indicates, use the _Ped/CV_ button in a direct modulation i.e. 1. Click Mod Assign 2. Hold down the _Ped/CV_ button 3. Whilst holding down Ped/CV button, toggle the _VCF: Freq_ slider 4. Use _Mod Amount_ dial to set the depth ---
**Author:** ![sinestarproject](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@sinestarproject](https://forum.udo-audio.com/u/sinestarproject)\ **Post date:** [1 June 2025 21:58 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/4 "2025-06-01T21:58:59Z")
ahhh the VCF i hadn’t thought of that - i was trying the LPF. thanks both, very kind pete ---
**Author:** ![ekeu](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/ekeu/32/1056_2.png) [@ekeu](https://forum.udo-audio.com/u/ekeu)\ **Post date:** [2 June 2025 09:25 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/5 "2025-06-02T09:25:42Z")
Heh, my apologies Pete - I mistakenly thought I was on a _Super 6_ topic!! But the principle should be the same using the _VCF: LPF_ slider on the Super Gemini! ---
**Author:** ![sinestarproject](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@sinestarproject](https://forum.udo-audio.com/u/sinestarproject)\ **Post date:** [2 June 2025 10:13 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/6 "2025-06-02T10:13:28Z")
Hi ekeu - ok i must be doing something wrong - i will try again - I did think the progress was the same as the hard wired panel destinations, but im not getting the MOD amount show up (or any effect if i chose LPF - but its good to know if should be possible - ill have another go later today - i must be missing a step. best Pete ---
**Author:** ![ekeu](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/ekeu/32/1056_2.png) [@ekeu](https://forum.udo-audio.com/u/ekeu)\ **Post date:** [2 June 2025 10:42 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/7 "2025-06-02T10:42:29Z")
In direct assignment, when you hold down the _Mod Assign: Source_ button and toggle the _LPF_ slider, you should see a cascade of lights move through the modulation section buttons from the right to the left, stopping at the light on the source button you’re holding. This indicates that the source and the destination slider have been paired. You can then adjust the _Mod Amount_ dial. ---
**Author:** ![sinestarproject](https://avatars.discourse-cdn.com/v4/letter/s/91b2a8/32.png) [@sinestarproject](https://forum.udo-audio.com/u/sinestarproject)\ **Post date:** [9 June 2025 13:28 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/8 "2025-06-09T13:28:51Z")
i never said thank you ekeu - the mistake i was making was NOT holding down the Mod Assign button whilst moving destination fader! so thank you. ---
**Author:** ![HMan](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hman/32/906_2.png) [@HMan](https://forum.udo-audio.com/u/HMan)\ **Post date:** [9 June 2025 14:15 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/9 "2025-06-09T14:15:37Z")
It’s an easy mistake to make at first. ---
**Author:** ![ekeu](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/ekeu/32/1056_2.png) [@ekeu](https://forum.udo-audio.com/u/ekeu)\ **Post date:** [9 June 2025 21:28 UTC](https://forum.udo-audio.com/t/mod-assign-lpf-not-possible/3418/10 "2025-06-09T21:28:29Z")
You’re welcome Pete, glad to be of help! 🙂