# Mod matrix range adjustments

**URL:** <https://forum.udo-audio.com/t/mod-matrix-range-adjustments/1229>\
**Category:** Feature Wish List\
**Created:** [25 May 2022 13:45 UTC](https://forum.udo-audio.com/t/mod-matrix-range-adjustments/1229 "2022-05-25T13:45:17Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Mannerow](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@Mannerow](https://forum.udo-audio.com/u/Mannerow)\
**Post date:** [25 May 2022 16:22 UTC](https://forum.udo-audio.com/t/mod-matrix-range-adjustments/1229/3 "2022-05-25T16:22:12Z")

</div>

Yup. Here are 2 previous threads on the topic:

> [@Full modulation range for unipolar modulators](https://forum.udo-audio.com/t/full-modulation-range-for-unipolar-modulators/49):
>
> For example, EG1 assigned to Resonance or X-mod covers only half of their range. There’s no way to make a full sweep from zero to max.

> [@Amount of amount is not enough!](https://forum.udo-audio.com/t/amount-of-amount-is-not-enough/968):
>
> Hi, i generally think that the amounts of modulation available are too gentle. im frustrated by the maximum position of these faders for example : -filter enveloppe amount -filter lfo amount -maximum modulation in the matrix is not enough i don’t have this feeling on other synths like polybrute for example which go way higher on his modulations amounts. Any way to increase this in next firmware ? Thanks.

I suggest submitting a feature request on this.

---

_[View the full topic](https://forum.udo-audio.com/t/mod-matrix-range-adjustments/1229)._