# Morphing between DDS1 and DDS2 by pedal

**URL:** <https://forum.udo-audio.com/t/morphing-between-dds1-and-dds2-by-pedal/1864>\
**Category:** Your Patches\
**Created:** [17 May 2023 17:58 UTC](https://forum.udo-audio.com/t/morphing-between-dds1-and-dds2-by-pedal/1864 "2023-05-17T17:58:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vanlesson](https://avatars.discourse-cdn.com/v4/letter/v/ba8739/32.png) [@Vanlesson](https://forum.udo-audio.com/u/Vanlesson)\
**Post date:** [17 May 2023 17:58 UTC](https://forum.udo-audio.com/t/morphing-between-dds1-and-dds2-by-pedal/1864/1 "2023-05-17T17:58:03Z")

</div>

I made a patch that allows to **morph** between two sounds (DDS1 and DDS1+DDS2) with help of an expression pedal. I use M-Gear EX-P, switched mode to M-Audio and potentiometer fully opened.  
It does make use of the fact that 100% PW of DDS2 deactivates DDS2, thus you can hear only DDS1 → modulation of PW by pedal is used.  
In this patch DDS2 is detuned very much from DDS1, which works great with organ like chords. DDS1 is a Hammond organ like waveform.  
[p1\_Morph\_pedal\_MW.s6](https://forum.udo-audio.com/uploads/short-url/xQDz3aUKPZGgEVnOHPtt2i2RtzX.s6) (35.6 KB).

---

<div class="post-metadata">

**Author:** ![udo-audio](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/udo-audio/32/8_2.png) [@udo-audio](https://forum.udo-audio.com/u/udo-audio)\
**Post date:** [18 May 2023 08:04 UTC](https://forum.udo-audio.com/t/morphing-between-dds1-and-dds2-by-pedal/1864/2 "2023-05-18T08:04:42Z")

</div>

Thanks for sharing this with us!