# No audio output from Super 6 desktop

**URL:** <https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107>\
**Category:** Super 6\
**Created:** [29 October 2023 19:47 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107 "2023-10-29T19:47:18Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![thefishman77](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@thefishman77](https://forum.udo-audio.com/u/thefishman77)\
**Post date:** [29 October 2023 19:47 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107/1 "2023-10-29T19:47:18Z")

</div>

Hello, new Super 6 desktop owner here. I’ve been emailing with support on this, but wanted to see if anyone else has had this problem.  
I’ve had the synth for a few weeks, every was working perfectly. I moved it to a new location in my studio, connected it back up, and since then cannot get any audio out of it. The only thing that changed is that it plugged the USB connection into my Mac. It shows up like it’s supposed to on the computer and everything. I’ve of course tried all the obvious things such as cables, different inputs, etc. The only audio that comes out is a slight crackle in the headphones when I turn the volume up and down. Thanks for any help!

---

<div class="post-metadata">

**Author:** ![Acidizer](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@Acidizer](https://forum.udo-audio.com/u/Acidizer)\
**Post date:** [29 October 2023 23:26 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107/2 "2023-10-29T23:26:17Z")

</div>

Turn off/on once or twice.

---

<div class="post-metadata">

**Author:** ![parallaxCloud](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@parallaxCloud](https://forum.udo-audio.com/u/parallaxCloud)\
**Post date:** [31 October 2023 20:13 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107/3 "2023-10-31T20:13:04Z")

</div>

My Super6 has this issue as well. I’ve been emailing with support to debug it.

---

<div class="post-metadata">

**Author:** ![thefishman77](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@thefishman77](https://forum.udo-audio.com/u/thefishman77)\
**Post date:** [1 November 2023 00:02 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107/4 "2023-11-01T00:02:43Z")

</div>

Mine problem has been solved. It started working when I removed my vesa mount. I guess the screws were too close to the 10mm it says. I added a few washers and now it’s fine.

---

<div class="post-metadata">

**Author:** ![parallaxCloud](https://avatars.discourse-cdn.com/v4/letter/p/ba8739/32.png) [@parallaxCloud](https://forum.udo-audio.com/u/parallaxCloud)\
**Post date:** [1 November 2023 20:04 UTC](https://forum.udo-audio.com/t/no-audio-output-from-super-6-desktop/2107/5 "2023-11-01T20:04:48Z")

</div>

That is interesting. My issue started when vesa mounted. I’ve since taken it off the vesa mount and it still persists.