# Okay to run super 6 on 110v?

**URL:** <https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396>\
**Category:** UDO Audio Gear\
**Created:** [9 May 2021 11:44 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396 "2021-05-09T11:44:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jade](https://avatars.discourse-cdn.com/v4/letter/j/a8b319/32.png) [@jade](https://forum.udo-audio.com/u/jade)\
**Post date:** [9 May 2021 11:44 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396/1 "2021-05-09T11:44:00Z")

</div>

Hello,  
I am in the USA and have received my 220v rated super 6 from Germany. Is it okay to run it at 110v? Should I replace the fuse? Or is it a good idea to use a step up transformer. Thanks 🙂

---

<div class="post-metadata">

**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\
**Post date:** [9 May 2021 12:11 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396/2 "2021-05-09T12:11:26Z")

</div>

You should probably contact Support about that directly:

[support@udo-audio.com](mailto:support@udo-audio.com)

---

<div class="post-metadata">

**Author:** ![White\_Noise](https://avatars.discourse-cdn.com/v4/letter/w/c89c15/32.png) [@White\_Noise](https://forum.udo-audio.com/u/White_Noise)\
**Post date:** [9 May 2021 15:58 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396/3 "2021-05-09T15:58:05Z")

</div>

I imported mine from Thomann to Socal, and mine came with international plugs including US, so I just plugged it into my studio power strip. No issues thus far.

---

<div class="post-metadata">

**Author:** ![MOOGelPackung](https://avatars.discourse-cdn.com/v4/letter/m/a3d4f5/32.png) [@MOOGelPackung](https://forum.udo-audio.com/u/MOOGelPackung)\
**Post date:** [9 May 2021 21:02 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396/4 "2021-05-09T21:02:41Z")

</div>

Manual page 20 says:

> … operates over a range of 90 to 250 volts and 50 to 60 Hz.

… what is no big surprise, because most modern standard power supplies are designed to be universal for a wide range.  
So you only need a cord that fits to your wallplug. 👍

---

<div class="post-metadata">

**Author:** ![jade](https://avatars.discourse-cdn.com/v4/letter/j/a8b319/32.png) [@jade](https://forum.udo-audio.com/u/jade)\
**Post date:** [8 June 2021 17:01 UTC](https://forum.udo-audio.com/t/okay-to-run-super-6-on-110v/396/5 "2021-06-08T17:01:36Z")

</div>

Adding for future reference: support contacted me and told me this was fine to run at 120v