# Pitchbebd range desktop model; Editing?

**URL:** <https://forum.udo-audio.com/t/pitchbebd-range-desktop-model-editing/1977>\
**Category:** Super 6\
**Created:** [22 July 2023 23:35 UTC](https://forum.udo-audio.com/t/pitchbebd-range-desktop-model-editing/1977 "2023-07-22T23:35:54Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MattMarantz](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@MattMarantz](https://forum.udo-audio.com/u/MattMarantz)\
**Post date:** [22 July 2023 23:35 UTC](https://forum.udo-audio.com/t/pitchbebd-range-desktop-model-editing/1977/1 "2023-07-22T23:35:54Z")

</div>

Is it possible to edit the pitch bend range on the desktop model? I can only figure out how to do it from my midi controller. Somehow it’s only covered in the manual for the keyboard model!

---

<div class="post-metadata">

**Author:** ![udo-audio](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/udo-audio/32/8_2.png) [@udo-audio](https://forum.udo-audio.com/u/udo-audio)\
**Post date:** [23 July 2023 06:47 UTC](https://forum.udo-audio.com/t/pitchbebd-range-desktop-model-editing/1977/2 "2023-07-23T06:47:45Z")

</div>

Press MOD ASSIGN to enter Mod Assign mode, then Press and hold BEND and press a key either side of C4 to set the bend range. For example press C3 to get +-1 octave bend

---

<div class="post-metadata">

**Author:** ![MattMarantz](https://avatars.discourse-cdn.com/v4/letter/m/a4c791/32.png) [@MattMarantz](https://forum.udo-audio.com/u/MattMarantz)\
**Post date:** [24 July 2023 02:34 UTC](https://forum.udo-audio.com/t/pitchbebd-range-desktop-model-editing/1977/3 "2023-07-24T02:34:25Z")

</div>

Ah! Ok sounds great. Maybe I have an old coy of the manual cause I didn’t see that in there or maybe just missed it. That helps. Thanks!