# Polychain two Super 6 desktops

**URL:** <https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711>\
**Category:** Super 6\
**Created:** [25 June 2024 11:34 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711 "2024-06-25T11:34:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [25 June 2024 11:34 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711/1 "2024-06-25T11:34:54Z")

</div>

This is touched on in several posts and mentioned in the write up of the Super 6 on the website; however I can’t seem to find much about the actual implementation of it or mention in the revised manual. How does this actually work? I’ve got the opportunity to pick up a second Super 6 desktop and, though this wouldn’t be the primary use, am wondering what the 24 voice options are and how the two units communicate for control (and I suppose specifically how the binaural functionality works). Anyone with some experience here?

---

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [28 June 2024 20:41 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711/2 "2024-06-28T20:41:13Z")

</div>

Email exchange with UDO tech support says that this is apparently not yet implemented but somewhere on the list for a potential in the future.

---

<div class="post-metadata">

**Author:** ![MrGetsliding](https://avatars.discourse-cdn.com/v4/letter/m/96bed5/32.png) [@MrGetsliding](https://forum.udo-audio.com/u/MrGetsliding)\
**Post date:** [30 June 2024 17:42 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711/3 "2024-06-30T17:42:23Z")

</div>

I’m wondering if you couldn’t get a similar outcome by using a midi translator - such as Bome Midi Transaltor Pro, to filter odd notes to one synth, and even notes to the other - while sending control info to both…

---

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [30 June 2024 19:04 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711/4 "2024-06-30T19:04:05Z")

</div>

Yes, I think there are some third party options for control and communication. I just didn’t know if UDO had or were planning some special sauce bits that would be specific to the synths.

---

<div class="post-metadata">

**Author:** ![Nicholas](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/nicholas/32/731_2.png) [@Nicholas](https://forum.udo-audio.com/u/Nicholas)\
**Post date:** [11 July 2026 23:53 UTC](https://forum.udo-audio.com/t/polychain-two-super-6-desktops/2711/5 "2026-07-11T23:53:06Z")

</div>

Just mentioning in a cross post here but I ended up making a little software applet to do this. See: [Super Janus](https://forum.udo-audio.com/t/super-janus/3883)