# Super 6 Cheat Sheet **URL:** \ **Category:** Super 6\ **Created:** [17 November 2021 20:39 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814 "2021-11-17T20:39:49Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [17 November 2021 20:39 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/1 "2021-11-17T20:39:49Z")
Someone on the FB group was asking for a Super 6 cheat sheet, with all the SHIFT functions etc. so I put this together today. Please feel free to add anything I have missed, in the comments below, and I’ll add it to this first post. Also, if anyone has design skills and would like to make a nicely formatted .pdf version, please go ahead! I’d be happy to host it. **UDO SUPER 6 CHEAT SHEET** **FADERS:** - LR PHASE sets PAN SPREAD in 12 voice mode - SHIFT + PW sets DRIFT amount - SHIFT + FREQ controls HPF cutoff in FIX mode - SHIFT + VCA LFO1 sets LFO2 to modulate VCA in keyboard version - SHIFT + ENV1 ATTACK sets ENV1 ATTACK HOLD time in desktop version - SHIFT + ENV1 DECAY sets ENV1 DECAY HOLD time - SHIFT + ENV2 DECAY sets ENV2 DECAY HOLD time **BUTTONS:** - SHIFT + MANUAL loads INIT patch - SHIFT + U.SIZE sets UNISON STACKING: 1 LED 3 voices stacked 2 LED 6 voices stacked 3 LED 6 voices stacked in an octave 4 LED 6 voices stacked as an octave and a fifth 5 LED 6 voices stacked as a major chord - SHIFT + EXT CLK sets EXTERNAL CLOCK mode ON or OFF plus: PATCH SELECT BUTTON 1: MIDI clock signals SENT PATCH SELECT BUTTON 2: MIDI clock signals RECEIVED PATCH SELECT BUTTON 3: Arpeggiator & Sequencer output MIDI - SHIFT + SWING sets SWING AMOUNT - SHIFT + LOAD + PATCH/BANK SELECT loads a Sequence from 1-16 - SHIFT + STORE + PATCH/BANK SELECT saves a Sequence to 1-16 - SHIFT + MOD ASSIGN clears all mapped modulation - MODULATION SOURCE and SHIFT + MOD ASSIGN clears all modulation from that SOURCE - MODULATION DESTINATION and SHIFT + MOD ASSIGN clears all modulation to that DESTINATION **SWITCHES & KNOBS:** - SHIFT + OCTAVE SELECT Transpose up or down in semitones - SHIFT + LFO1 SHAPE Load currently selected DDS1 wave as LFO1 wave - DDS 2 range to LFO, DDS 2 switch to AUDIO IN, SHIFT and MIX set audio input level - SHIFT + ENVELOPE KEYTRACK enables Keytracking for both envelopes **GLOBAL SETTINGS (Press SHIFT):** - MOD AMOUNT sets GLOBAL FINE TUNE in cents - MIDI CH: Set MIDI Channel 1-16 - TX/RX E: MIDI Controllers Patch 1 = Transmit CCs Patch 2 = Receive CCs Patch 3 = Transmit NRPNs - TX/RX P: Program Changes Patch 1 = Transmit Patch 2 = Receive - DUMP: Dump current patch via MIDI as SYSEX - LOCAL: On/Off - TUNE: Start Filter calibration routine - MPE: On/Off - TRNSP (Desktop): Mod Amount sets Global Transpose - GLOBAL RESET: Hold MANUAL for 5 seconds **POWER CYCLE:** - POWER ON with TUNE button held, move MIX to make DDS2 audible, play note and adjust DDS TUNE knob to be in tune with DDS1, release TUNE button and key, move DDS2 TUNE knob to +6 and back to centre, leave for 30 seconds to calibrate DDS2 tuning - POWER ON with PATCH held to disable write protection for PATCH, WAVEFORM and SEQUENCE management via USB PATCH drive - POWER ON with SHIFT held to enter Bootloader mode for firmware updates via USB BOOT drive **INIT PATCH SETTINGS:** - init\_patch.s6 can be replaced on the BOOT disc with any patch - If no init\_patch.s6 is present S6 boots to last active patch - If no init\_patch.s6 is present and no patches are stored S6 boots to MANUAL mode ---
**Author:** ![Vanlesson](https://avatars.discourse-cdn.com/v4/letter/v/ba8739/32.png) [@Vanlesson](https://forum.udo-audio.com/u/Vanlesson)\ **Post date:** [17 November 2021 21:16 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/2 "2021-11-17T21:16:48Z")
Thanks a lot, that is very helpful. Maybe you could add the DDS2 tune routine under chapter Power Cycle. ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [17 November 2021 21:18 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/3 "2021-11-17T21:18:24Z")
Thanks, I’ll add it tomorrow. Can you point me to the place online or in the manual that details it? ---
**Author:** ![Vanlesson](https://avatars.discourse-cdn.com/v4/letter/v/ba8739/32.png) [@Vanlesson](https://forum.udo-audio.com/u/Vanlesson)\ **Post date:** [17 November 2021 21:21 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/4 "2021-11-17T21:21:01Z")
Yes, it is on page 120 of manual V3 ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [17 November 2021 21:31 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/5 "2021-11-17T21:31:02Z")
Added! That’s another hardcore confusing one like setting External Input Level. 😉 ---
**Author:** ![Shor](https://avatars.discourse-cdn.com/v4/letter/s/85f322/32.png) [@Shor](https://forum.udo-audio.com/u/Shor)\ **Post date:** [18 November 2021 05:41 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/7 "2021-11-18T05:41:18Z")
Great job putting this together. One thing, is it sensible to distinguish “shift mode” from actually holding down shift? Such as copying DDS1 shape to LFO1 is holding shift, but other things, such as changing unison stack is in “shift mode” (does this actually work while holding shift too? I got uncertain whilst typing this). ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [18 November 2021 06:27 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/8 "2021-11-18T06:27:35Z")
Good point, I’ll have a think and update later, maybe I’ll put everything in “Shift Mode” under the same heading for clarity. ---
**Author:** ![Shor](https://avatars.discourse-cdn.com/v4/letter/s/85f322/32.png) [@Shor](https://forum.udo-audio.com/u/Shor)\ **Post date:** [18 November 2021 07:09 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/9 "2021-11-18T07:09:05Z")
That would make sense. ---
**Author:** ![softroom](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/softroom/32/205_2.png) [@softroom](https://forum.udo-audio.com/u/softroom)\ **Post date:** [18 November 2021 12:43 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/10 "2021-11-18T12:43:51Z")
It might also be worth adding a pictorial representation of the clock divide values shown briefly as lit button patterns as you sweep the Tempo knob. And is it me or does it seem weird there’s a dotted 32nd note but no actual 32nd available? (With all the buttons lit you’d think maybe that would represent 32nd notes, given half of them lit correspond to 16ths.) ---
**Author:** ![Clusk](https://avatars.discourse-cdn.com/v4/letter/c/3ec8ea/32.png) [@Clusk](https://forum.udo-audio.com/u/Clusk)\ **Post date:** [18 November 2021 15:48 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/11 "2021-11-18T15:48:12Z")
> [@HermetechMastering](#): > > SHIFT + ENVELOPE KEYTRACK enables Keytracking for both envelopes I can’t get this to work, seems both envelopes are tracking when I switch on tracking, is it working for others? ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [18 November 2021 16:50 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/12 "2021-11-18T16:50:33Z")
They are all just copied from the latest version of the manual. I haven’t tried them all out yet, but there’s a chance they are not implemented in the OS yet, like the Mix as a modulation destination. I’ll make some changes to the OP tomorrow and add (NOT IMPLEMENTED YET???) etc. ---
**Author:** ![DjokesBokes](https://avatars.discourse-cdn.com/v4/letter/d/85e7bf/32.png) [@DjokesBokes](https://forum.udo-audio.com/u/DjokesBokes)\ **Post date:** [18 November 2021 23:48 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/13 "2021-11-18T23:48:29Z")
Great work! Though I can’t seem to figure out where that TUNE button is. (probably from the desktop version) ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [19 November 2021 06:35 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/14 "2021-11-19T06:35:08Z")
It’s between LOCAL and MPE! I made all the list going from left to right on the machine. ---
**Author:** ![DjokesBokes](https://avatars.discourse-cdn.com/v4/letter/d/85e7bf/32.png) [@DjokesBokes](https://forum.udo-audio.com/u/DjokesBokes)\ **Post date:** [19 November 2021 10:03 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/15 "2021-11-19T10:03:10Z")
Thank you! Didn’t spot it yesterday. Now I’m curious if it works! ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [19 November 2021 10:16 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/16 "2021-11-19T10:16:26Z")
Yeah it works, I tried it the other day. Shift Mode, Tune, tunes all the filters, takes a minute to do. ---
**Author:** ![commens](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/commens/32/131_2.png) [@commens](https://forum.udo-audio.com/u/commens)\ **Post date:** [22 November 2021 19:10 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/17 "2021-11-22T19:10:18Z")
> [@HermetechMastering](#): > > - POWER ON with TUNE button held, move MIX to make DDS2 audible, play note and adjust DDS TUNE knob to be in tune with DDS1, release TUNE button and key, move DDS2 TUNE knob to +6 and back to centre, leave for 30 seconds to calibrate DDS2 tuning > - POWER ON with PATCH held to disable write protection for PATCH, WAVEFORM and SEQUENCE management via USB PATCH drive > - POWER ON with SHIFT held to enter Bootloader mode for firmware updates via USB BOOT drive Hermetch - thanks for putting this together. I translated this over to a google sheet for my own reference and use. I’m happy to share it with the wider community here if folks are interested. If people want to suggest edits/updates to make it a living doc, permissions on the doc are open for comments - > **[UDO Super-6 Cheat Sheet](https://docs.google.com/spreadsheets/d/1kx71YUTlQKjV7Bq3dIJkQC3SLRZMUXf8tGagGAT_Z-I/edit?usp=sharing)** > > Sheet1 > > Control,Function,Additional Notes > Faders,LR PHASE ,Pan Spread,12-Voice Mode Only > SHIFT + PW,Drift Amount > SHIFT + FREQ ,HPF cutoff in FIX mode > SHIFT + VCA,LFO1 sets LFO2 to modulate VCA,KB Version Only > SHIFT + ENV1 ATTACK,ENV1 ATTACK HOLD... ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [22 November 2021 20:06 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/18 "2021-11-22T20:06:32Z")
Thanks for doing this, I had been meaning to update my original post with all the great suggestions posted here, but got snowed under with the mastering (my day job). This is great, I was hoping it would turn into a bit of a community project! ---
**Author:** ![DaveM](https://avatars.discourse-cdn.com/v4/letter/d/67e7ee/32.png) [@DaveM](https://forum.udo-audio.com/u/DaveM)\ **Post date:** [23 November 2021 09:37 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/19 "2021-11-23T09:37:10Z")
I am a new user and would like to thank you for this information. Very helpful. ---
**Author:** ![auctor11](https://avatars.discourse-cdn.com/v4/letter/a/4bbf92/32.png) [@auctor11](https://forum.udo-audio.com/u/auctor11)\ **Post date:** [8 October 2022 22:26 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/20 "2022-10-08T22:26:30Z")
Thank you so much for this! ---
**Author:** ![HermetechMastering](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/hermetechmastering/32/43_2.png) [@HermetechMastering](https://forum.udo-audio.com/u/HermetechMastering)\ **Post date:** [9 October 2022 08:39 UTC](https://forum.udo-audio.com/t/super-6-cheat-sheet/814/21 "2022-10-09T08:39:24Z")
No worries, probably needs to be updated a bit for the new firmware revs. If anyone has time to go through and post what has changed in the intervening firmware since last November, and post it here, I’ll go back and edit the original post. [Next page](https://forum.udo-audio.com/t/super-6-cheat-sheet/814.md?page=2)