# Super 6 only sending note data via midi since Firmware 1.6

**URL:** <https://forum.udo-audio.com/t/super-6-only-sending-note-data-via-midi-since-firmware-1-6/3168>\
**Category:** Super 6\
**Tags:** issue\
**Created:** [25 January 2025 19:18 UTC](https://forum.udo-audio.com/t/super-6-only-sending-note-data-via-midi-since-firmware-1-6/3168 "2025-01-25T19:18:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hllr](https://avatars.discourse-cdn.com/v4/letter/h/848f3c/32.png) [@hllr](https://forum.udo-audio.com/u/hllr)\
**Post date:** [25 January 2025 19:18 UTC](https://forum.udo-audio.com/t/super-6-only-sending-note-data-via-midi-since-firmware-1-6/3168/1 "2025-01-25T19:18:30Z")

</div>

Hi!  
I updated my super 6 to firmware 1.6 and since then only note and velocity data is sent via MIDI.  
No sustain pedal data, no aftertouch and no cc data from the encoders.  
I have the ST49 and the ribbon controller.

Has anyone else experienced this?

---

<div class="post-metadata">

**Author:** ![GregVDS](https://avatars.discourse-cdn.com/v4/letter/g/90db22/32.png) [@GregVDS](https://forum.udo-audio.com/u/GregVDS)\
**Post date:** [25 January 2025 23:01 UTC](https://forum.udo-audio.com/t/super-6-only-sending-note-data-via-midi-since-firmware-1-6/3168/2 "2025-01-25T23:01:51Z")

</div>

Hi and welcome,

I do not have a Super 6 but the MIDI settings seem the same between Super Gemini and Super 6.

Did you check your MIDI settings since the firmware update?

You’ll find more info in the manual [here](https://cdn.prod.website-files.com/641dd1a703957e750da6b5e3/66e4297ca75f0eb7e730884b_UDO_Super6_Manual.pdf#page=102).

Maybe the **MIDI CH** number has been reinitialised, or the **TX/RXE** and **TX/RX P** settings changed?

Anyway, if this does not clear the problem, do not hesitate to write to U.D.O. for more support 🙂

Let us know