# Tunning Issues - Super 6 Desktop

**URL:** <https://forum.udo-audio.com/t/tunning-issues-super-6-desktop/1571>\
**Category:** Super 6\
**Created:** [15 November 2022 02:50 UTC](https://forum.udo-audio.com/t/tunning-issues-super-6-desktop/1571 "2022-11-15T02:50:05Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![castano](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@castano](https://forum.udo-audio.com/u/castano)\
**Post date:** [15 November 2022 02:50 UTC](https://forum.udo-audio.com/t/tunning-issues-super-6-desktop/1571/1 "2022-11-15T02:50:05Z")

</div>

I am trying to record some ideas, and noticed the super 6 desktop is off by a semitone  
Every time I start up the synth, when I play notes it’s out of tune  
when I play a C note, I get a C# flat  
I tried the shift + transpose and was able to bring it to a Flat C  
but that’s not good enough  
can’t seem to get it in tune, so that I can use it to record melodic content that involves other instruments like a guitar or other synths  
has anyone been able to fix this issue?

---

<div class="post-metadata">

**Author:** ![castano](https://avatars.discourse-cdn.com/v4/letter/c/3da27b/32.png) [@castano](https://forum.udo-audio.com/u/castano)\
**Post date:** [15 November 2022 03:09 UTC](https://forum.udo-audio.com/t/tunning-issues-super-6-desktop/1571/2 "2022-11-15T03:09:39Z")

</div>

So I did a Global Reset!

- Turn on your Super 6.
- Press and hold the **MANUAL** button for about 5 seconds until all LEDs turn off and on again.
- After this, the autotune procedure will be initiated automatically. At this point you can release the **MANUAL** button and wait for the autotune procedure to complete.

and seems to be working (Playing in Tune)