# Update instructions - init patch - v0.30

**URL:** <https://forum.udo-audio.com/t/update-instructions-init-patch-v0-30/943>\
**Category:** Super 6\
**Created:** [11 January 2022 21:04 UTC](https://forum.udo-audio.com/t/update-instructions-init-patch-v0-30/943 "2022-01-11T21:04:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BeneathClouds](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/beneathclouds/32/120_2.png) [@BeneathClouds](https://forum.udo-audio.com/u/BeneathClouds)\
**Post date:** [11 January 2022 21:04 UTC](https://forum.udo-audio.com/t/update-instructions-init-patch-v0-30/943/1 "2022-01-11T21:04:55Z")

</div>

Hi,

I have just installed the latest firmware v0.30, and in doing so observed a small problem.

According to the update instructions, we are to do the following:

> 1. Delete all files from the Super 6’s boot disk.
> - _Make sure to empty the trash if you are a Mac user,  
> or the update will not be possible_
> 
> 2. Copy the firmware file ‘xos\_v0.30.bin’ from this folder to the boot disk.
> - If asked if you want to copy files without properties, choose ‘yes’.
> - Wait and make sure the file transfers are complete.  
> This may take several minutes. Do not power off or unplug the USB cable  
> during the transfer.

With this update, I notice the instructions no longer mention copying the init patch as it did before. However, if I follow the instructions as written, then all files are deleted off the boot disk, and only the new firmware is copied over, leaving the synth without an init patch.

I have since copied the init patch from v0.27 back onto the boot disk, and now all seems to be fine. However, I thought it best to make light of this discrepancy, especially in case anyone blindly follows the instructions as I just did.

Note, on my first attempt at restoring the init patch, the synth refused to boot properly, and on my second attempt it worked. Which was weird. Anyway I share this information in case anyone encounters the same problem.

Cheers.

---

<div class="post-metadata">

**Author:** ![DDS](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/dds/32/11_2.png) [@DDS](https://forum.udo-audio.com/u/DDS)\
**Post date:** [12 January 2022 18:04 UTC](https://forum.udo-audio.com/t/update-instructions-init-patch-v0-30/943/2 "2022-01-12T18:04:24Z")

</div>

We’ve added the init patch file to the v0.30 firmware folder. You can download the updated folder over [here](https://www.udo-audio.com/media/support-items/udo_super6_firmware_v0.30_a163.zip).

---

<div class="post-metadata">

**Author:** ![BeneathClouds](https://dub1.discourse-cdn.com/flex017/user_avatar/forum.udo-audio.com/beneathclouds/32/120_2.png) [@BeneathClouds](https://forum.udo-audio.com/u/BeneathClouds)\
**Post date:** [12 January 2022 18:39 UTC](https://forum.udo-audio.com/t/update-instructions-init-patch-v0-30/943/3 "2022-01-12T18:39:56Z")

</div>

Thanks 👍

Please also check your update instructions (v0.30):

> 1. Delete **all** files from the Super 6’s boot disk.
> 2. Copy the firmware file ‘xos\_v0.30.bin’ from this folder to the boot disk.

Versus (v0.27):

> 1. Delete **all** files from the Super 6’s boot disk.
> 2. Copy the firmware file ‘xos\_v0.27.bin’ **and** the inital patch file ‘init\_patch\_v0.27.s6’ from this folder to the boot disk.

Otherwise we are left without an init patch as it happened to me.

Cheers.