Can anyone verify bender to VCF is working - running the latest OS 1.2.6? Bender to DDS works fine (as does dest (both, upper,lower). However setting VCF to any amount has no effect with the bender moving horizontally. Set env and VCF to middle position after init patch, set leftmost toggle switch to trig. FWIW, setting DDS to zero for both bend and lfo2 still results in bend when toggle set to LFO2 on. Filter modulation via vertical bender modulation works fine.
Are you in the mode with LFO2 always on? There was a behaviour change listed in the update notes; I’d suggest reading those and seeing if it covers what you’re experiencing.
1 Like
Thanks - that explains the bender behavior when LFO2 is set to on. My biggest issue however remains the lack of VCF adjustment via the bender horizontally when set to any of the settings.
To reproduce - init patch, set env, vcf to 50% (so there’s room to modulate), set VCF slider in dest to 10, set dest to both (or any setting has the same effect), set toggle to trig, play notes and move the bender horizontally - no effect.
I’m experiencing the same thing with v1.26 on my Super 8.
As @afewster mentions the updated bender behaviour works as described in the release notes, but bender > VCF does nothing regardless of amount or LFO2 mode.
Additionally, any bender > VCF setting in patches (my own and factory) has been broken.
Thanks for confirming @ozvena
UDO support confirm this is a known issue and should be fixed in v1.27!
3 Likes
Thanks for letting us know. I’ll hang back on updating until 1.27 appears 